Alkaline Degreasing Process (CLN-108): - Process Steps: 1. Preparation: The metal parts or components to be cleaned are first inspected and prepared for the cleaning process. This may involve removal of heavy soils or pre-cleaning steps. 2. Degreasing Bath: The metal parts are immersed in a tank containing the alkaline degreasing solution (CLN-108). Alternatively, the solution can be applied through spray systems depending on the application and scale of operation. 3. Chemical Action: The alkaline cleaning agents react with the oil and grease on the metal surface, breaking them down into smaller particles and lifting them away from the substrate. 4. Rinsing: After the degreasing process, the metal parts are thoroughly rinsed with water to remove the dissolved contaminants and residual cleaning solution. 5. Drying: Once rinsed, the metal parts are dried using methods such as air drying or using heated air to prevent water spots or rust formation.