ACTIVATOR POWDER How to Use Activator Powder 1. Preparation: Depending on the manufacturer's instructions, mix the activator powder with water or a degreaser. The concentration will vary based on the cleaning task and the level of grease or grime. 2. Application: Apply the mixed solution to the surface that needs cleaning. This can be done using a spray bottle, mop, or brush, depending on the area and type of surface. 3. Dwell Time: Allow the solution to sit on the surface for a few minutes to penetrate and break down the grease and grime. The recommended dwell time will be specified by the product manufacturer. 4. Scrubbing: For heavy grease build-up, use a brush or scrubbing pad to agitate the surface and help lift the contaminants. 5. Rinse Thoroughly: After cleaning, rinse the surface thoroughly with clean water to remove any residue from the activator powder and degreaser. 6. Drying: Dry the cleaned surface with a clean cloth to prevent water spots and streaks.